Industrial sandblaster parts lifted with a chain hoist in an aluminum smelter
Blog · Projects · 3 min

Project: installing an industrial sandblaster in an aluminum smelter

Two 1,200 lb parts to install on an elevator, in a very tight space. We designed and welded a temporary structure to lift them together, in one go.

In an aluminum smelter in Quebec, we installed an industrial sandblaster. Here is the challenge, the solution we chose and the result.

The challenge: 2,400 lb in a tight space

Two parts weighing 1,200 lb each had to be installed on the elevator, in a very tight space. The constraints of the location prevented us from mounting them separately.

In an operating plant, the space around equipment is rarely clear: structural steel, ducts, other machines and traffic aisles all limit the lifting angles.

The sandblaster parts on the floor, ready to be joined on the temporary structure
The parts on the floor, before the lift.

Our solution: a welded temporary structure

As a CWB-certified company, we designed and welded a temporary structure to support both parts together. It let us lift them in one go and set them in place safely.

A temporary structure keeps both parts aligned during the lift and spreads the load between the lifting points. It is only used for the lift: once the parts are secured in place, it has no further role. This kind of custom piece, designed and welded for a single job, is what makes an otherwise impossible installation possible.

The two sandblaster parts joined on a temporary structure, then lifted with a chain hoist
The two parts joined on the temporary structure, then lifted together with a chain hoist.
The sandblaster parts overhead, hanging from the chain hoists
The lift, under the plant's structural steel.

The result

Both parts were lifted and set in place in a single operation, safely. When space is tight, preparation makes all the difference.

The sandblaster elevator installed in the smelter
The elevator, with the parts in place.

Do you have a difficult installation?

Describe the equipment, its weight and the available space with the quote form, or call us at 438-357-8800. We plan the lift and the installation with you.

Photos: Alliance Maintenance Industrielle. The client is not named.